Europe is ready to build with SIP panels

Dit is het laatste blogbericht. Deze samenvatting wordt automatisch weergegeven op basis van de samenvatting van het blogbericht. De afbeelding en titel worden ook automatisch gevuld

Designers, architects and constructors discover the possibilites of buildings made with Structural Insulated Panels (SIP panels). This phenomenon comes from North America and it is for years a big success in the entire  industry! The construction method is widely applied in applied in Canada, USA and in Mexico as well. Also on the European continent you will find more and more construction companies who design and build with this concept: will Europe (and the rest of the world of course) follow the big success of America?

Animation of SIP Construction (source YouTube: sips.org)

 

Constructions with SIP panels

SIP stands for Structural Insulating Panels. It is also known as a sandwich panel. A SIP panel consists of at least three parts. By combining an inner and outer board with a core of insulation, a SIP building system generates a wall with high strength and rigidity properties. This system is used for both bearing and non-supporting walls, but also for roofs. SIPs are high performance building systems for residential and light commercial construction. The result is a building system that is extremely strong, energy efficient and cost effective.

structure of a SIP panel

MgO and EPS insulation material

 

Core – Insulation

Many insulation options are available for a sandwich panel, we describe three of them: EPS, PIR and PUR.

✔ EPS is the abbreviation of Expanded Poly Styrene. It is a material that we encounter daily in our lives. Expanded polystyrene, commonly known just as styrene foam. It is mainly used in insulation materials, and because of its special properties, as well as packaging, ground, road and water engineering.

✔ PUR consists of a two-component sprayed foam that consists of: polyol and isocyanate. It has a high lambda value, and therefore defines heat loss in an excellent way. It is a widely applied insulation material. This is a CFC-free product and therefore environmentally friendly. The polyurethane foam adheres to almost any material. In addition, it is easy to use.

✔ PIR, or polyisocyanurate, is a plastic that is made specifically for insulation. PIR differs from PUR due to increased fire safety, especially in the field of flue gas development. In addition, the material absorbs no moisture. However, the main difference is the even higher insulation value of 0.023 – 0.026 W / Mk. For comparison: take glass or rock wool with a value of 0.040. PIR isolates approximately 1.7 times better for the same thickness. An exterior wall that is insulated with PIR remains relatively thin and has a excellent insulation.

Obviously, many other insulation materials are possible. An important aspect is that each insulation material has its own heat resistance, fire resistance and of course price.

Facings – Magnesium oxide boards

We were talking about the insulation, now we treat the outer two layers of the SIP panel. Most common is oriented strand board (OSB) used for the facings. But why not using MgO?
By gluing magnesium oxide (MgO) boards on either side of the insulation material, you will have an insulating panel. For convenience, we are talking about MgO sheeting material, which is also the chemical designation. One of the many unique features of MgO is that the material is non-combustible. To be more specific we are talking about European fire class A1. On the exterior the MgO board will be finished with a waterproof layer, like stone strips or cork. The interior can be painted right away or finished with plaster.


MgO boards – SINH™ board

 

Cost effective construction 

Due to its prefab characteristics it is possible to build a rough building casco in a very short time frame. The application of SIP panels has great advantages over conventional construction methods. One of them is the lead time of a the construction of a house, which means that significant cost savings can be realized. A second advantage is the independency of weather influences, which means that you are able to guarantee continuous quality.

You save on material costs, but in addition you save money in construction costs further ahead. The production time and construction time on site is significantly reduced. This leads to a cost saving on labor. Moreover, a building in SIP panels is energy efficient.


Our MgO SIP panel: SINH™ panel

 

Circular construction and zero energy buildings

We have good news in case the client or customer indicated to want to build energy-neutral. Because MgO boards production process is more than fifty percent cleaner compared to (portland) cement if we look at the carbon footprint and CO2 emissions. Additionally, there are no toxic substances used in the boards, the life cycle is longer and the building material is 100% recyclable. We have investigated this in cooperation with TNO. (TNO is the Dutch Organisation for Applied Scientific Research)
To resume: MgO is a contribution to a better and greener environment!

What design options do we have?

Since this is a prefab building method all panels are constructed on a production facility. The assembly is at the construction site. These SIP panels can be customized according to all kind of design specifications. This provides the customer and architects enough opportunities for their own individual preferences.


New housing project in Nieuwleusen (The Netherlands)

 

An example in practice is our collaboration with the SIP panel producer RC Panels. In 2016, in Nieuwleusen (The Netherlands) they chose our MgO boards for a new construction project of zero energy houses. Please visit our project page with reference projects and all possible applications of MgO boards.

Benefits of SIPs

All benefits of SIPs:
✔ Reduction of construction costs
✔ Reduction of labour costs
✔ Reduction of lead time of projects
✔ Energy savings
✔ Wide range of applications
✔ Consistent quality
✔ Design flexibility

Tip:

Do you need to know more about MgO, insulation and SIP panels? Please get in touch with us for more information or support. Use the contact form below or call us: +31 (0)88 3748400!

 

Blog: Jan Engels and Pablo Heiliegers

 

SINH website ¡Hola, bienvenido!

We have reached a new digital milestone, just two months after we have launched our SINH website in German. Now it is turn for our website in Spanish. From now on the Spanish speaking architect, the dealer and construction worker is able to get to know everything about versatile sheating material made of magnesium oxide (MgO). ¡Hola, bienvenido SINH!


Guggenheim in Bilbao, Spain

 

Spanish construction industry

After the bursting of the bubble in the Spanish construction and real estate market in 2007, after 2014 recovery in sight. The construction sector in Spain is growing again. The perpective for 2017 is a growth of 3 to 4%.

In addition to the economic outlook improvement in Spain, there is increasing emphasis on cost-effective construction solutions, innovation and sustainability in the construction industry. Several concepts such as prefabricated, circular building and building energy neutral attract more and more attention. Magnesium oxide boards is a perfect fit for these developments.

Latin America

MgO boards are widely applied in the construction projects in countries like Chili and Mexico. Especially if we mention prefab buildings and SIP panels. Which country follows on this continent!?

About SINH Building Solutions

SINH Building Solutions (Formerly known as Withindia) is located in Netherlands and in China. We develop and supply cost-effective, sustainable and innovative building materials for passive fire protection. Our solutions are applied in new-build, renovation or restoration projects. Our core product is SINH™ board made of magnesium oxide (MgO). This is a superior replacement for all gypsum and fiber cement wallboards, can also be used structurally to replace osb or plywood sheathing. Particularly useful for assemblies rated against damage by fire, water, sound, impact and mould. In addition to these characteristics, MgO has excellent adhesion values that are perfect for stucco, acrylic stucco, wallpaper, stone, tile, brick, and much more.

We invite you to visit the SINH website!

 

Blog: Pablo Heiliegers

 

Buy cheap and waste money

Recently one of our customers drew my attention to the study “Magnesium oxide boards cause moisture damage inside facades in new Danish buildings” conducted by Kurt Kiel Overgaard Hansen, Tommy Bunch-Nielsen, Bent and Carsten Grelk Red. These authors are working at the Department of Civil Engineering, Technical University of Denmark and the Bunch Building Institute. The focus of the study was around treating the application of magnesium oxide, or shortly MgO boards in ventilated facades.

The article describes the effect of drops of saline (sodium chloride in water) (NaCl) leaked from the boards falling at screws, fittings and anchors of metal which resulted in negative impacts on the façade structure and a loss of several million Euros for the builder. The research concluded that MgO boards should not be used in ventilated façade systems and in situations where excessive humidity exists. The boards used by the Danes are dissolved by water and the drops of salt erodes metal construction materials. In the article several tests have been conducted to underpin the analyses.


ventilated facade in Denmark

 

Why you can not draw any generic conclusions based on this article?

The Danish investigators only refer to the sheathing board product that is used by this company. It is almost impossible to find out where this building material is purchased, as well as the composition of the boards and which quality control system is used in order to guarantee the performance.

The importance of CE-certified building materials

Our answer to this problem is a CE-certificate combined with a Declaration of Performance (DoP). The MgO board purchasing expert is aware of China’s availability of cheap and low range sheathing board products. You might come across Chinese producers who have a Quality Certificate and even a copy of a CE Certificate copied of somebody else. (Known as a Chinese Export certificate). The total expenses of European certification is more than USD 150.000. In addition, for many producers in China it is hard to comply with all requirements of CE marking. The plant of SINH (Ningbo) Construction Material Co. Ltd. is one of the few CE certified MgO board producing companies with audits of the Dutch independent organization KIWA. This voluntary CE marking ensures consistent quality that is recorded through an accredited DoP Declaration and an ETA (European Technical Assessment) by European standards. Therefore, it is of vital importance to purchase MgO boards from solid certified companies instead of going for a quick (and cheap) Alibaba deal.

CE marking

 

The chemical composition of the board

The article starts with the basic problem of the generation of tears on the board, which results in salty water, and consequently causes corrosion of the metal parts. Although a very thorough analysis, unfortunately the research does not conclude with a solution to the problem. The professional purchaser is already aware of the problem, with the recipe of non-certified MgO building materials and the knowledge that this will bring consequential losses in the future. It is impossible to mess with recipes having CE marking accompanied by a DoP, without any consequences for the CE certification. SINH Building Solutions is fully aware of the issues relating to the leaking of salty water on boards, with the amount of chloride and saw-dust in this product. With our unique recipe, we guarantee that the SINH™ board will not show the same problems that were described in this Danish study.

Why buy cheap and waste money?

A very common filling material for MgO boards is saw dust. This is a relatively cheap filler, which also fits perfectly in dry conditions. The producer can create more margin and/or guarantee low purchasing prices for the trader if he increases the amount of wood, which is at the expense of the amount of magnesium oxide powder in the recipe. These kinds of non- certified producers fail to show concern around the integrity of the board which may swell, mold or even start to rot. The same he can do adding big particle saw dust.


SINH™ board certified MgO boards

 

Application of MgO boards in facades

A MgO board is an open material, which means it has good moisture ab- and desorption properties. The application of this material in ventilated facades, could have been correct if the chemical recipe contained the right mix of material. Above that we always recommend our customers to protect the boards for all kinds of weather conditions. Doing so the MgO board will become an underlayment board. We have found many glue- stucco- and paint companies such as: Innotec, Schönox, Ardex, Codex, Coba, Bostik, Strikolith, etc. who have tested our boards thoroughly with submersion and freezing-thawing scenarios with some suppliers even providing a warranty of 10 years.

These companies also provide working instructions for the usage of their products. Options to finish the board are: stone strips, ceramics, cork, paint or plaster work.

Contact Team SINH

The SINH Building Solutions team invites you to add on sharing information about this subject and contribute to this discussion. We are keen to know how we can cooperate with your company to make successful use of this great material. Call us: +31 (0)88 374 8400, drop an e-mail or fill out our contact form below.

 

Blog: Jan Engels

 

Green building materials FIRST!

The Environment Committee of the European Parliament wants wants to ban the rights for the cement industry for free CO2 emission rights for building materials. This means we have to use greener building materials to contribute to a more sustainable world.

The cement industry has to buy her allowances at auction (Emission Trading System) starting from 2020 and 2030. The recent conclusion of “Carbon Market Watch”, an organization that follows the emissions market, is evident and shows the cement industry earned between 2008 and 2015 about 5 billion in excess free undistributed rights.

In February 2017 the European Parliament will vote on this proposal and the final decision follows in consultation with the European leaders.

CO2 emission building materials: background

Concrete is the most used building material allover the world. We need Cement in order to be able to make concrete. In addition we need a huge amount of ‘marl’ (calcium carbonate) to make cement. Calcium carbonate degrades during the furnace process in amongst 56% calcium oxide and 44% CO2!

CO2_Cement_SINH_Blog

In 2014 more than 4.1 billion m3 of cement is produced and processed worldwide, with a weight of more than 8.1 trillion kilograms leads to the same amount of CO2 emissions! Therefore the cement and concrete industry is responsible for 5% of the global CO2 emissions.

The biggest producers are located in China (54%) and India (7%).

Magnesium-oxide-bouwproducten-bijdrage-aan-een-lagere-CO2-uitstoot

Source: statista.com

 

The winners: green building materials 

In addition to all the initiatives already taken to make cement and concrete more environmental friendly and which are described in several articles, we offer a greener alternative, namely: magnesium oxide board materials. Magnesium oxide (MgO) boards are widely used in China, Japan, Australia, USA and Korea. In Europe, it is still a relatively new building material. SINH™ board is one of the few brands active in The Netherlands and in the rest of Europe. To produce magnesium oxide you only need the half of temperature of the production of cement and concrete. In conclusion our solution leads directly to a 50% cut of the total amount of CO2 emissions.

From now on it is: green building materials first!
It’s easy as that!

Download our MgO carbon footprint Infographic for free!

Ask for it by submitting the contact form below.

 

Blog: Jan Engels & Pablo Heiliegers

Meet up with us at Material Xperience 2017

Meet up with SINH™ at Material Xperience 2017!

Yes, It is time for the biggest and most inspiring material event in the Netherlands from the 6th of February until the 10th February 2017. This year held in the Jaarbeurs Exhibitions Center in the city of Utrecht in The Netherlands. Most noteworthy and the good thing about it… We are exhibitor!

 

What is Material Xperience 2017?

The purpose of the Material Xperience event is providing the visitor the opportunity to get in contact with materials. Thus Material Xperience 2017 is the leading event for (interior) architects and creative professionals focused on materials innovation. Moreover that is what we do with our materials: innovating.

Some facts:

  • More than 100 exhibitors!
  • 250 new materials!
  • Inspiring speakers!
  • Netwerking!
  • 4 segments: Roofs & Facades, Walls & Ceilings, Floors and Digital Technologies
  • More facts!

 

 

Our material at Material Xperience 2017

First of all we want to introduce magnesium oxide boards, equally MgO boards to architects, designers and other professionals. Probably I can hear you saying… What is that exactly?

To get an answer to this question we would like to welcome you to our stand at the Material Xperience 2017 trade fair.  This is the way you will get to know how to apply and use this (construction)material. In addition we would like to show you our newest “green” product innovations. In addition you will have the opportunity to get to know the people of SINH™, a brand of Withindia Building Solutions.

Free Tickets!

Do you want to visit the exhibition? Yes ofcourse, that is possible! We have tickets available, totally for free!
The only thing you have to do is to register yourself (and your colleagues) to click on the banner in this Blog. Subsequent you will be redirected to the registration page. This will take only 2 minutes and you can join this fantastic event!

In conclsuion: please be inspired by discovering new materials, meet one another, share experiences, and exchange knowledge. Please take a look at our website and Social Media channels about our MgO-solutions!

sinh-board-sinh-bij-material-xperience-2017

BouwBeurs 2017

So, speaking about trade fairs. This year the BouwBeurs 2017 (the trade fair for architects and construction systems in The Netherlands) is opposed to the Material Xperience event in The Jaarbeurs Utrecht. Due to the fact both events are in the same building it could be interesting to combine your visit of the BouwBuers with the Material Xperience 2017 event. Therefore we have a free ticket for you as well! So please make an appointment with us.

Consequently: see you in Utrecht at Material Xperience 2017!

 

Blog: Pablo Heiliegers

About my experience of CE Certification

Withindia Building Solutions is a developer and supplier of innovative and sustainable magnesium oxide construction solutions. Furthermore we worked one and a half year on achieving CE-Certification for its core product: SINH™ board. Perhaps you might think: That takes long! Can’t CE Certification go any faster?

But I’m afraid you have to count on this kind of time laps if you want to introduce a new construction material on the European market. Particularly if you are busy with all other daily company activities.
Therefore I want to take you step by step into “my journey” of CE certification.

Step 1: the basis

First of all, everything starts with which product you want to introduce and which European standards you have to deal with. For us, this product is: SINH™ board
De base for CE-certification are the documents ETAG 18-1 (type 2, fire proof products for vertical walls) and ETAG  18-4 (type Z2, indoor use).

sinh-board_tapered_logo_branded

Step 2: European Assessment Document

The second step was to develop an European Assessment Document (EAD). We started this process in Augustus 2015 and its conclusion came in May 2016. We needed more than 70 tests in different labs to realize the EAD document. These results are registered in the EAD.

Step 3: Audits, Factory Production Control

The third step was Factory Production Control (FPC) by KIWA at our Chinese partner. For that the first audit took place in June. Subsequently not every detail was in order and a follow up audit became necessary.
This follow up audit was executed by Skype connection. A novelty for everyone. We walked through the entire production chain in China during the live connection. In practice we showed that a Skype audit works perfect, on the condition that all basic conditions are met. (like a visit at manufacturing site). All persons concerned worked in a constructive way together to meet the final result. In the end a GO for certification was given by the auditors. During the audit the open mind of KIWA regarding the use of modern communication methods has had a substantial impact on achieving this result in a reasonably short time.

Step 4: CE Certification

Our company received the CE-certificate including DoP (Declaration of Performance) on the 1st of October of 2016 of KIWA. Summarized: An excellent job!

ce-certification-europa

Finaly: my experience

The entire process took us one and a half year to achieve the CE Certifacation. It was a period of “blood, sweat and tears”. The whole path took very long and was very expensive.

But why can I recommend you this process?
Not only because you comply with regulations, but also going this path will increase the quality and consistency of your final product and satisfied customers. You are in fact forced to come down to the level of operational instructions, and to describe these in your new quality management system.

I can hear you saying: once you received CE Certification you can sit and lean back on your chair… Well, let me tell you: it will be the opposite! From now on you are committed to manage high product requirements and the process to achieve it.

Personally this is not my favourite project, but on the other hand it has been very useful and a blessing for the final result of our company!

Therefore I’m curious about what you think. Could you tell me more about your experience? Or do you have any questions? Please, let us know!

 

Opinion: Jan Engels, CEO Withindia Building Solutions.

Withindia Building Solutions expands! Sustainable growth and focus on Europe

2016 is almost nearing it’s end, days become shorter and nights longer. The bustle and cozy month of December is arriving soon. This fact provides room and the need for reflection. A lookback at a tumultious but a momentous year.
Futhermore the parent company of SINH™ is futureoriented as well. Sustainable growth is the key word. Sustainable in many ways: In conclusion Withindia Building Solutions is expanding!

Focus: Europe

The company activities changed in India, and after starting a new business unit in China, with focus shifted to Europe the next year. A clear and logical step. The European economy is growing, exports are on the rise, and the construction industry is recovering after many years… Therefore the traffic light is GREEN! Given the fundamental importance to make this world more sustainable, and the reduction of CO2  has become a necessity. Withindia Building Solutions wants en needs to contribute to it. Our focus on growth is mainly in Europe, as a result everything falls into place. 

Application-SINH™-board-Construction-Site


“Seems like the European construction market is full of opportunities. Most noteworthy are the recent trends in this business with continious focus on prefab, the transition of energy of natural gas to electricity and their underlying innovation and sustainable solutions,.are for constructors, workers and architects a great addition to current construction systems. Furthermote new alternative materials will be available for alrready existing construction materialsn. One of them is 
Magnesium oxide boards

Jan Engels (CEO)

Team spirit Withinindia BV

The head office of Withindia Building Solutions is located in a small creative part of The Hague, in the old Caballero Factory to be more precise. Popularly known as The CabFab.  Where in old times it was all about producing cigarettes, nowadays this venue embodies activities in the fields of multimedia, graphic design, photography, publicity, ICT, communications, events and architecture. Today all companies located in The CabFab have innovative, creative and cultural spirit. All are elements of vital importance to Withindia. For instance, we have a evident connection with India. Thus SINH means lion in Hindi.

mister-keepi-people-withindia-building-solutions


The passion for India remains, it’s in our heart. First: The support of the charity in India with 
Mr. Keepi, is a living example. Our business focus is on sustainable growth in Europe” 
Jan Engels (CEO)

It’s not only about growth, it’s all about people!
Recently the team in the Netherlands increased with two new colleagues. We will present you the latest reinforcement:
Casper van der Made will be in charge for Finance, administration and logistics. Pablo Heiliegers will take care of marketing, communications and commercial matters. We welcome both gentlemen to our beautiful team and that they contribute to innovation and sustainability to the construction industry!

Read more about who we are and what we do at the website of Withindia,
or have a look at website of SINH™ for more information concerning magnesium oxide solutions.

 
Blog: Pablo Heiliegers

How to build an interior wall using magnesium oxide boards?

Learn how to build an interior wall with magnesium oxide SINH™ boards.

We did make a step by step video tutorial. See how easy it is to build a drywall by using SINH™ boards.

Benefits of SINH™ board wall with a wood-batten or metal stud:

  • Simple and easy to install
  • Magnesiumoxide board is lightweight, strong and impact resistant
  • fire-resistant sheet material
  • Save drying time; screws instead of adhesives
  • Does not deform when it comes into contact with water

Tools and materials you’ll need:

  • Standard screwing drill
  • Standard health and safety gear
  • Track saw
  • Self-drilling, countersunk, slotted-head screws
  • Hand drill for pre-drilling frame
  • Standard saw
  • Retractable knife

How to video

 

Steps:

  • Place the wood-batten or metalstud framework
  • Saw or cut the SINH™ board to the correct dimensions
  • First mount one side of the frame
  • Place insulation, for maximum fire resistance performance we advise to use stone wool insulation material
  • Mount the other side of the frame
  • Finish the wall, click here for the how-to-video
    hoe-bouw-binnenwand-magnesiumoxide-plaatmateriaal-doe-het-zelf-foto2For any assistance or further questions, get in contact with our Technical team.

20 Smart cities chosen in India

Indian Government has announced by word of the Minister of Urban Development its list of 20 Smart Cities from 11 States and Delhi.

20 Winning cities have proposed a total investment of Rs.50,802 cr (7,6 billion Euro) over five years with all the cities proposing Public-Private-Partnership as a major vehicle of resource mobilization. A total area of 26,735 acres has been identified by these cities for making them smart through necessary interventions.

Elaborating on the advantages of Smart City Mission, the Minister Naidu said that this leads to integrated urban planning by addressing the issue of infrastructure, land use planning, transport, urban design and architecture in a holistic manner unlike in the past. Stating that building a smart city is not a destination but a series of small steps in that direction.

The Smart City plan was launched to support the fast urbanization and sustainable growth in India. Studies show that India has to built between 700-900 million sqft of residential and commercial space a year until 2030: equivalent of adding more than 2 Mumbai’s every year.

Among the 20 Smart Cities are: Jaipur, Udaipur (Rajasthan), Surat and Ahmedabad (Gujarat).

The list of Smart Cities is published by the Press Information Bureau on Jan 29, 2016.

Fungus and Magnesium Oxide boards: happy marriage?

Last week we were called by an Indian architect, who wanted to use SINH™ boards to cover air-condition piping’s. He wanted to know if Magnesium Oxide Boards would host or stimulate the growth of fungi in his construction.

As our company has not yet conducted a test to cover this issue, I started to search the internet for answers. First of all, you should know that there are thousands of species of fungi. Most of them are unharmful, only few of them cause illness and allergies.

Like Duane Craig (2009), who is a blogger for The Construction Informer, wrote in 2009: “Most of the time even though mold is present in our buildings it isn’t actively growing to the extent we can see it with the unaided eye. Then too, mold growth is greatly affected by humidity and since many of our buildings are air conditioned, or use dehumidifiers, the opportunity for mold growth is diminished.”

I also came across an article of Pamela Hargrove (2004): Testing for Fungal Growth in Building Products: a collaborative Effort. This article shows main tests available and developed in cooperation with ASTM, the American Society for Testing and Materials.

To summarize, there are 3 main test methods for the panel products industry available:

1. ASTM G21 – is a method used to test synthetic polymers including poly(vinyl chloride) and plastics.

2. ASTM D 3273 – is a standard Test Method for Resistance to Growth of Mold on the Surface of Interior Coatings in an Environmental Chamber. This standard is for fungal growth in soil, contained in the humidified environmental chamber. Air circulation within the environmental chamber circulates the fungal spores in the chamber to the vertically suspended samples four inches over the soil. Weekly photographic images of each sample are emailed to customers so they can follow the progress of the testing.

3. ASTM D6329-98(2008)– Standard Guide for Developing Methodology for Evaluating the Ability of Indoor Materials to Support Microbial Growth Using Static Environmental Chambers. The test is designed to run for 12 weeks, four times longer than ASTM D3273. The quantitative assessment here is a count of the number of colony-forming units (CFUs) taken from samples collected during weeks 1, 6 and 12, and compared against the baseline level of CFUs at the start of the test.

Some other standards (not limitative) that have been published for testing of materials for resistance to fungi are:

  • MIL-STD 810E – Method 508.4 – Determines whether fungus will grow on a device exposed to warm, moistured air in the presence of fungus spores. The MIL-STD 810 involves spraying the test items with a composite of fungal spores and supporting the test items in the environmental chamber for 28 days.
  • ASTM C 1338 – Fungi Resistance of Insulation Materials and Facings
  • ISO 16869 – Assessment of the Effectiveness of Fungistatic Compounds in Plastics Formulations

To address the need for uncoated building products including gypsum board and cement board, a task group was formed in February 2004. The proposal in 2011 for a new test method ASTM WK32079, (Test Method for Determination of Mold Growth on Building Products designed for Exterior Applications) is one of its results.

In conclusion:

  1. Each test has its own strength and limitations;
  2. There are no special designed test methods dedicated to test fungi resistance of Magnesium Oxide Boards (external & internal applications);
  3. To limit fungi growth best is to manage humidity. To manage humidity, the architect and builder have to pay attention to building design, product choice, good construction practices and proper maintenance;
  4. Characteristics of Magnesium Oxide Boards as a material do not favour the growth of fungi due to its open molecular structure and high permeability to vapour.

 

My answer on the question “Fungus and Magnesium Oxide boards: happy marriage?” would therefore be “NO”.